Chevron Regiment QM Sergeant Pair
1/2 inch tape applied over wool background. Tape color designates Branch of Service: Infantry: Sky Blue; Artillery: Red; Cavalry: Yellow. Background color should be the color of the coat.
NAA 646
Enquiry about Chevron Regiment QM Sergeant Pair
Captcha
Related Products
-
Embroidered Officer Hat CS Wreath
This officer hat device features gold embroidery on a black velvet field and is made with top quality craftsmanship. Click on the picture for a larger image. Imported.
The SMALL hat device is approximately 2 7/8 inches wide and 2 inches high.
The LARGE hat device is approximately 3 1/2 inches wide and 2 1/2 inches high.
NAA 624
-
Chevron Co QM Sergeant Pair
1/2 inch tape applied over wool background. Tape color designates Branch of Service: Infantry: Sky Blue; Artillery: Red; Cavalry: Yellow. Background color should be the color of the coat.
NAA 645
-
Saddle Blanket 6 Point Star Pair
US Saddle Blanket six point star of gold embroidery on a black background. Sold in pairs. Approximately 2 1/4″ in diameter.
NAA 651
-
Insignia Brass Hat Hardee Hat Eagle
The Hardee Hat Eagle is for use on the folded side of the regulation Hardee Hat. It is made of stamped brass with a wire back for attaching to the hat.
NAA 619
-
US Officer Shoulder Boards Pair
US officer Gilt Shoulder Boards are embroidered with Gold bullion thread on velvet field. These shoulder boards were used by the US Army from 1851 thru 1871. Select rank and branch of service.
NAA 635
-
Collar CS 1st Lt Pair
Embroidered bar collar rank insignia for CS 1st Lt. Two gold bars on branch of service background. Select branch of service.
NAA 640
-
Collar CS 2nd Lt Pair
Embroidered bar collar rank insignia for CS 2nd Lt. One gold bar on branch of service background. Select branch of service.
NAA 641
-
Embroidered Officer Hat CSA Wreath
This officer hat device features gold embroidery on a black velvet field and is made with top quality craftsmanship. Click on the picture for a larger image. Imported.
The SMALL hat device is approximately 2 7/8 inches wide and 2 inches high.
The LARGE hat device is approximately 3 1/2 inches wide and 2 1/2 inches high.
NAA 625
-
Insignia M1851 Company Letter
The M1858 Company Letter is made of stamped brass. Wire fasteners on back attach the insignia to the hat. The letter is 1 inch high.
NAA 618
-
Insignia Brass Hat M1851 Enlisted for Artillery Cavalry & Infantry
The M1851 Enlisted Hat Insignia is appropriate for both US and CS Enlisted Artillery, Cavalry, and Infantry troops and was used until 1872. It is made of stamped brass from the original dies and has a wire back for attaching to the hat. The insignia is about 3 1/2 inches wide and 2 inches high.
NAA 615
-
Embroidered Officer Hat MS Wreath
This officer hat device features gold embroidery on a black velvet field and is made with top quality craftsmanship. Click on the picture for a larger image. Imported.
The SMALL hat device is approximately 2 7/8 inches wide and 2 inches high.
The LARGE hat device is approximately 3 1/2 inches wide and 2 1/2 inches high.
NAA 630
-
Collar Stars with Wreath Pair
Embroidered Gold Wreath with 3 stars on buff background collar insignia for CS Generals.
Available in Black, Buff and Medium gray.
NAA 637
-
Insignia Embroidered Officer Hat Artillery Cavalry or Infantry
This officer hat device features gold embroidery on a black velvet field and is made with top quality craftsmanship. Click on the picture for a larger image. Imported.
The SMALL hat device is approximately 2 7/8 inches wide and 2 inches high.
The LARGE hat device is approximately 3 1/2 inches wide and 2 1/2 inches high.
NAA 622
-
Insignia Brass Hat 1858 Ordnance
The 1858 Ordnance Hat Insignia is appropriate for Ordnance Department enlisted troops. The insignia is made of brass from the original dies and has a wire back for attaching to the hat.
NAA 621
-
Embroidered Officer Hat US Mounted Rifles
The LARGE hat device is approximately 3 1/2 inches wide and 2 1/2 inches high.
NAA 633
-
Corps Badge Twenty fifth
US Saddle Blanket six point star of gold embroidery on a black background. Sold in pairs. Approximately 2 1/4″ in diameter.
NAA 651
-
Chevron Hospital Steward Pair
The Hospital Chevron is made of emerald green cloth, edged in yellow with a caduceus embroidered in yellow silk thread in the center. The chevron is placed obliquely, at an angle of about thirty degrees, downward from the outer to the inner seam of the sleeve. The head of the caduceus points toward the outer seam of the sleeve.
NAA 650
-
Collar CS Captain Pair
Embroidered bar collar rank insignia for CS Captain. Three gold bars on branch of service background. Select branch of service.
NAA 639
-
Embroidered Officer Hat Masonic
This officer hat device features gold embroidery on a black velvet field and is made with top quality craftsmanship. Click on the picture for a larger image. Imported.
The SMALL hat device is approximately 2 inches wide and 2 1/4 inches high.
The LARGE hat device is approximately 2 1/2 inches wide and 3 inches high.
NAA 628
-
Embroidered Officer Hat Ordnance
This officer hat device features gold embroidery on a black velvet field and is made with top quality craftsmanship. Click on the picture for a larger image. Imported.
The LARGE hat device is approximately 2 1/2 inches wide and 3 1/2 inches high.
NAA 631
-
Embroidered Officer Hat Jefferson Davis
This officer hat device features gold embroidery on a black velvet field and is made with top quality craftsmanship. Click on the picture for a larger image. Imported.
The LARGE hat device is approximately 2 1/2 inches wide and 3 1/2 inches high.
NAA 627
-
Chevron Sergeant Major Pair
1/2 inch tape applied over wool background. Tape color designates Branch of Service: Infantry: Sky Blue; Artillery: Red; Cavalry: Yellow. Background color should be the color of the coat.
NAA 647
-
Chevron Sergeant Pair
1/2 inch tape applied over wool background. Tape color designates Branch of Service: Infantry: Sky Blue; Artillery: Red; Cavalry: Yellow. Background color should be the color of the coat.
NAA 643
-
Chevron Ordnance Sergeant Pair
1/2 inch tape applied over wool background. Tape color designates Branch of Service: Infantry: Sky Blue; Artillery: Red; Cavalry: Yellow. Background color should be the color of the coat.
NAA 648
-
Embroidered Officer Hat US Sharpshooters
The SMALL hat device is approximately 2 7/8 inches wide and 2 inches high.
The LARGE hat device is approximately 3 1/2 inches wide and 2 1/2 inches high.
NAA 634
-
Insignia Brass Hat Irish Harp
While not a regulation insignia, the Irish Harp is worn on hats and coats. The Irish Harp is made of stamped brass and is authentic to the original. There are wires on the back for attachment.
NAA 620
-
US General Shoulder Boards Pair
US General Gilt Shoulder Boards are embroidered with Gold bullion thread on velvet field. These shoulder boards were used by the US Army from 1851 thru 1871. Generals of all branches were Staff only, so these shoulder boards are correct for all branches. Select rank.
NAA 636
-
Insignia M1851 Regimental Number 5/8 Inch
The M1851 Regimental Number Hat Insignia is made of stamped brass and is 5/8 inch high. It has wire fasteners on back for attachment.
NAA 616
