Cavalry Saber Knot
Black leather strap with a braided leather tassel. One end fastens to the grip of the saber and the tasseled end slips over the wrist to prevent dropping the saber during combat. It measures 22 inches including the tassel.
864
Enquiry about Cavalry Saber Knot
Captcha
Related Products
-
Infantry Cartridge Box with tins
890
-
Georgia Frame Buckle and Belt
This Brass Georgia Frame Buckle is a close copy of an original. It measures approximately 2 1/4 inches wide.
Select Black or Russet leather belt.
862
-
Pistol Holster Indian War
The Indian War “Cavalry” Pistol Holster has a smaller flap than the Civil War model. This Pistol Holster is made of high quality leather embossed with “US” on the holster body. The holster is sewn with white linen thread. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a closed bottom. Available in black leather only.
867
-
Belt NCO & Officer
This NCO Belt is made from high quality American leather. This belt is made to fit any 2-Piece Buckle or Spoon & Wreath Buckle and NO STITCHING is required to affix the Buckle. Brass hook makes this belt adjustable for many sizes. The NCO Belt is also appropriate for officers where a full sword belt is not applicable. The belt is available in Black or Russet leather.
855
-
Belt & Snake Buckle
This quality economical 1 3/4 inch belt comes complete with a 2-piece snake cast brass buckle. A brass prong makes this belt adjustable up to a 50 inch waist. The belt is only available in black leather.
860
-
Pistol Holster Indian War
The Indian War “Cavalry” Pistol Holster has a smaller flap than the Civil War model. This economical Pistol Holster is made of quality leather embossed with “US” on the holster body. The holster is sewn with white linen thread. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a closed bottom. Available in black leather only.
868
-
US Indian War Pistol Cartridge Pouch
This is the Indian Wars pistol cartridge pouch for the M1873. Nearly identical to the American Civil War Cap Box, except with US in oval embossed on the flap. This economical cap box features an interior lining, brass finial, 2 belt loops on the back and is sewn in white thread.
875
-
CIVIL WAR US CSA PISTOL BOX
It is sewn with white linen thread, has the brass finial, and has two belt loops on the back.883
-
CIVIL WAR US UNION CS CONFEDERATE ENFIELD BOX
This Enfield cartridge box is made per British regulations in black leather with white linen thread. The tins are included. Per the original the box has cartridge box sling loops on the back.881
-
Pistol Holster Closed Bottom
This economical and authentically made Pistol Holster fits most .36 – .44 caliber revolvers. The holster features full wrap around flap that is both stitched and riveted. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a CLOSED bottom. Available in Black or Russet leather.
The holster is worn on the right side, with the gun butt forward: RIGHT Side, Butt Forward. Left handed models – LEFT Side, Butt Forward – are also available. Left side holsters were less common as they were not standard issue.
866
-
Belt Saber or Sword Belt
This Saber or Sword Belt is made from high quality American leather and comes with the over the shoulder Sam Browne strap and all hangers. Snap swivels are NOT included and are available at an EXTRA CHARGE. 2 snap swivels are required.
This belt is made to fit any 2-Piece Buckle or Spoon & Wreath Buckle and NO STITCHING is required to affix the Buckle. Brass hook makes this belt adjustable for many sizes. The belt is available in Black or Russet leather.
856
-
.69 Caliber Confederate Cartridge Box
888
-
CIVIL WAR CS CONFEDERATE M1858 PISTOL LEATHER HOLSTER
NATURAL LEATHER “CS STAMPED” ***Left hand draw*** Can be worn on the Left hip or on Right hip for cross draw also called Right Side Grip/Butt ForwardFits belts up to 2-3/4″ wide885
-
Cavalry Saddle Bags
These Civil War Saddle Bags are made of high quality American leather. Great attention to detail has been made to ensure the most accurate authentic reproduction. The saddle bag measures approximately 9 inches wide x 10 inches high x 3 3/4 inches deep. The overall length from end to end is approximately 36 inches. These high quality saddle bags are available in Black or Russet leather.
879
-
Cavalry Carbine Cartridge Box
An economical cavalry carbine cartridge box features an inner flap covering a tool pouch. Wooden blocks for cartridges are included. The tab on the front flap is both sewn and riveted. There are 2 belt loops on the back. The box is sewn in white thread and is made of black leather and now in Russet.
Options: Black or Russet.
873
-
Cavalry Sword Hanger
Sword Hanger became a standard cavalry issue throughout the Civil and Indian Wars, up to 1900. Prior to the onset of the Civil War, J.E.B. Stuart did not like the design of the sword hangers used at that time so he designed and patented his own style of hanger. His device enabled the cavalryman to remove the sword, scabbard, and belt slings entirely without unhooking the scabbard from the belt and leaving the straps swinging loose from the belt rig.
The hanger is available in black or brown.
858
-
CIVIL WAR US CSA PISTOL BOX
It is sewn with white linen thread, has the brass finial, and has two belt loops on the back.882
-
Belt Saber or Sword Belt Hanger
This hanger is typically for NCO & Officer Belts, but can be used on enlisted and even modern day belts. This hanger is designed to slide over the existing belt. The hanger is available in black only.
Snap Swivels are available at an extra charge. 2 snap swivels are needed.
857
-
Belt Roller Buckle Belt
This Roller Buckle Belt is made of quality leather with a Japanned black roller buckle. The belt is 1 7/8 inches wide. Available in black leather only.
859
-
Cavalry M1885 Carbine Boot
The Carbine Boot was designed to hold the barrel of a trooper’s carbine snugly while riding on his mount.
This first pattern M1885 carbine boot is made of High Quality leather. Available in Black leather only.
872
-
CIVIL WAR US UNION OFFICER M1851 LEATHER SWORD SABER BELT & BUCKLE — ++
This Saber or Sword Belt is made from high quality American leather and comes with the over the shoulder Sam Browne strap and all hangers.Black/Brown leather This belt is made with SOFT leather892
-
Indian War & 2-piece M1874 US Buckle
Quality economical Indian War 1 3/4 inch belt comes complete with a 2-piece US cast brass buckle. A brass hook makes this belt adjustable up to a 50 inch waist. The belt is only available in black leather.
863
-
Cavalry Carbine Sling
Carbine Sling is authentically reproduced, carries an arsenal stamp, and is correct for both Civil War and later period cavalry. It features a regulation buckle and brass end piece. Available in Black Leather.
870
-
Belt Enlisted M1855 with Keeper
M1855 US issue belt with Brass Keeper installed. The brass keepers were commonly utilized on mid to late war M1855 Enlisted waist belts for Federals. They began to appear by early 1863 to replace the leather loop keeper that had been the standard prior to the war. The keeper has prongs to fasten to the leather waist belt. This belt fits all the one piece buckles and belt plates. Select Black or Russet leather color.
851
-
CIVIL WAR RIFLE US UNION MUSKET REGULATION CAP BELT POUCH-BROWN LEATHER
CIVIL WAR RIFLE US UNION REGULATION MUSKET CAP BELT POUCH-BROWN LEATHERReproduction percussion cap pouch. Shield shape.Made of black leather and lined with wool. Fits belts up to 2-3/4″ wide896
-
Belt Enlisted M1855 Sealed Russet Leather
M1855 Enlisted Belt. The russet leather has been sealed so it is slightly glossy and is difficult to dye.
For waist sizes up to 48″. Fits all the one piece buckles and belt plates.
852
-
Belt Enlisted M1855 & CS Oval Belt Plate
M1855 US issue enlisted belt including cast brass (NOT lead filled) CS oval belt plate. This belt fits waist sizes up to 50 inches. The belt is available in black leather only.
853
-
Civil War Cartridge Box with Tins Union and Confederate
This excellent quality reproduction Civil War Cartridge Box is made of durable black leather and is suitable for both Union and Confederate impressions. It features roller buckle attachments for the sling (sold separately) and comes with a set of two cartridge tins as well as an inner flap and tool pouch.
880
