Cavalry Carbine Socket Tapered
This Carbine Socket is made of high quality leather and is tapered per the originals. The Carbine Socket was designed to hold the barrel of a trooper’s carbine snugly while riding on his mount. This pattern of Carbine socket continued in service after the Civil War and into the Indian Wars through the early 1880’s until replaced by the Carbine Boots. Available in Black leather. Russet leather is available by special order.
871
Enquiry about Cavalry Carbine Socket Tapered
Captcha
Related Products
-
CIVIL WAR US UNION CS CONFEDERATE ENFIELD BOX
This Enfield cartridge box is made per British regulations in black leather with white linen thread. The tins are included. Per the original the box has cartridge box sling loops on the back.881
-
Pistol Holster Open Bottom
This economical and authentically made Pistol Holster fits most .36 – .44 caliber revolvers. The holster features full wrap around flap that is both stitched and riveted. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a OPEN bottom. Available in Black or Russet leather.
The holster is worn on the right side, with the gun butt forward: RIGHT Side, Butt Forward. Left handed models – LEFT Side, Butt Forward – are also available. Left side holsters were less common as they were not standard issue.
865
-
CIVIL WAR US CSA SPRINGFIELD MUSKET CARTRIDGE BOX
Black Leather Ammo Cartridge Box-holds a large amount of pre-made gun powder rounds for your musket rifle. This piece uses a sling that attaches to the Cartridge Box. (Sling Sold Separately)884
-
Cavalry M1885 Carbine Boot
The Carbine Boot was designed to hold the barrel of a trooper’s carbine snugly while riding on his mount.
This first pattern M1885 carbine boot is made of High Quality leather. Available in Black leather only.
872
-
US Indian War Pistol Cartridge Pouch
This is the Indian Wars pistol cartridge pouch for the M1873. Nearly identical to the American Civil War Cap Box, except with US in oval embossed on the flap. This economical cap box features an interior lining, brass finial, 2 belt loops on the back and is sewn in white thread.
875
-
Georgia Frame Buckle and Belt
This Brass Georgia Frame Buckle is a close copy of an original. It measures approximately 2 1/4 inches wide.
Select Black or Russet leather belt.
862
-
Belt Enlisted M1855 Sealed Russet Leather
M1855 Enlisted Belt. The russet leather has been sealed so it is slightly glossy and is difficult to dye.
For waist sizes up to 48″. Fits all the one piece buckles and belt plates.
852
-
Cavalry 1874 Dyer Cartridge Pouch
The M1874 Dyer cartridge pouch is used with the 45/70 rifle or carbine during the Indian Wars. It is made of high quality black leather with a US in oval embossed on the flap. The flap closure has a brass plate and finial. There are two belt loops on the back. It is lined with lambs wool. The pouch is available in black and Russet leather.
876
-
Belt Enlisted M1855
M1855 US issue enlisted belt. This belt fits all the one piece buckles and belt plates. Select Black or Russet leather. Now available in white.
850
-
Cavalry Sword Hanger
Sword Hanger became a standard cavalry issue throughout the Civil and Indian Wars, up to 1900. Prior to the onset of the Civil War, J.E.B. Stuart did not like the design of the sword hangers used at that time so he designed and patented his own style of hanger. His device enabled the cavalryman to remove the sword, scabbard, and belt slings entirely without unhooking the scabbard from the belt and leaving the straps swinging loose from the belt rig.
The hanger is available in black or brown.
858
-
Pistol Holster Indian War
The Indian War “Cavalry” Pistol Holster has a smaller flap than the Civil War model. This Pistol Holster is made of high quality leather embossed with “US” on the holster body. The holster is sewn with white linen thread. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a closed bottom. Available in black leather only.
867
-
CIVIL WAR RIFLE US UNION MUSKET REGULATION CAP BELT POUCH-BROWN LEATHER
CIVIL WAR RIFLE US UNION REGULATION MUSKET CAP BELT POUCH-BROWN LEATHERReproduction percussion cap pouch. Shield shape.Made of black leather and lined with wool. Fits belts up to 2-3/4″ wide896
-
CIVIL WAR RIFLE US UNION MUSKET REGULATION CAP BELT POUCH-NATURAL LEATHER
CIVIL WAR RIFLE US UNION REGULATION MUSKET CAP BELT POUCH-NATURAL LEATHERReproduction percussion cap pouch. Shield shape.Made of black leather and lined with wool. Fits belts up to 2-3/4″ wide895
-
CIVIL WAR US CSA PISTOL BOX
It is sewn with white linen thread, has the brass finial, and has two belt loops on the back.882
-
Belt Saber or Sword Belt Hanger
This hanger is typically for NCO & Officer Belts, but can be used on enlisted and even modern day belts. This hanger is designed to slide over the existing belt. The hanger is available in black only.
Snap Swivels are available at an extra charge. 2 snap swivels are needed.
857
-
Cavalry Carbine Cartridge Box
An economical cavalry carbine cartridge box features an inner flap covering a tool pouch. Wooden blocks for cartridges are included. The tab on the front flap is both sewn and riveted. There are 2 belt loops on the back. The box is sewn in white thread and is made of black leather and now in Russet.
Options: Black or Russet.
873
-
Pistol Holster Closed Bottom
This economical and authentically made Pistol Holster fits most .36 – .44 caliber revolvers. The holster features full wrap around flap that is both stitched and riveted. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a CLOSED bottom. Available in Black or Russet leather.
The holster is worn on the right side, with the gun butt forward: RIGHT Side, Butt Forward. Left handed models – LEFT Side, Butt Forward – are also available. Left side holsters were less common as they were not standard issue.
866
-
Belt NCO & Officer
This NCO Belt is made from high quality American leather. This belt is made to fit any 2-Piece Buckle or Spoon & Wreath Buckle and NO STITCHING is required to affix the Buckle. Brass hook makes this belt adjustable for many sizes. The NCO Belt is also appropriate for officers where a full sword belt is not applicable. The belt is available in Black or Russet leather.
855
-
Cavalry Saddle Bags
These Civil War Saddle Bags are made of high quality American leather. Great attention to detail has been made to ensure the most accurate authentic reproduction. The saddle bag measures approximately 9 inches wide x 10 inches high x 3 3/4 inches deep. The overall length from end to end is approximately 36 inches. These high quality saddle bags are available in Black or Russet leather.
879
-
Cavalry Spur Strap
The cavalry spur strap measures 5/8″ x 18 3/4″. Sold individually. Available in black leather only.
878
-
Belt Enlisted M1855 with Keeper
M1855 US issue belt with Brass Keeper installed. The brass keepers were commonly utilized on mid to late war M1855 Enlisted waist belts for Federals. They began to appear by early 1863 to replace the leather loop keeper that had been the standard prior to the war. The keeper has prongs to fasten to the leather waist belt. This belt fits all the one piece buckles and belt plates. Select Black or Russet leather color.
851
-
CIVIL WAR US UNION OFFICER M1851 LEATHER SWORD SABER BELT & BUCKLE
This Saber or Sword Belt is made from high quality American leather and comes with the over the shoulder Sam Browne strap and all hangers.Black/Brown leather This belt is made with SOFT leather892
-
CIVIL WAR US CSA SPRINGFIELD MUSKET CARTRIDGE BOX BROWN
Leather Ammo Cartridge Box-holds a large amount of pre-made gun powder rounds for your musket rifle. This piece uses a sling that attaches to the Cartridge Box. (Sling Sold Separately) The Cartridge Box rests at your side. The cartridge box also has 2- loops on the back so it can be worn on a waist belt as well. The Cartridge Box has an inside leather lid and the outside cover secures closed with a strap with a slit in it that fits over a brass knob so you do not loose your gun powder rounds. There is also a pocket on the inside that holds your nipple pic, and “T” wrench.886
-
Confederate Cartridge Box
887
-
CIVIL WAR US CSA PISTOL BOX
It is sewn with white linen thread, has the brass finial, and has two belt loops on the back.883
-
Indian War & 2-piece M1874 US Buckle
Quality economical Indian War 1 3/4 inch belt comes complete with a 2-piece US cast brass buckle. A brass hook makes this belt adjustable up to a 50 inch waist. The belt is only available in black leather.
863
-
Belt & Snake Buckle
This quality economical 1 3/4 inch belt comes complete with a 2-piece snake cast brass buckle. A brass prong makes this belt adjustable up to a 50 inch waist. The belt is only available in black leather.
860
-
Pistol Holster Indian War
The Indian War “Cavalry” Pistol Holster has a smaller flap than the Civil War model. This economical Pistol Holster is made of quality leather embossed with “US” on the holster body. The holster is sewn with white linen thread. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a closed bottom. Available in black leather only.
868
