Leather Goods

  •
    Send Inquiry For This Product

    .69 Caliber Confederate Cartridge Box

    888

  •
    Send Inquiry For This Product

    Belt & Snake Buckle

    This quality economical 1 3/4 inch belt comes complete with a 2-piece snake cast brass buckle. A brass prong makes this belt adjustable up to a 50 inch waist. The belt is only available in black leather.

    860

  •
    Send Inquiry For This Product

    Belt Enlisted M1855

    M1855 US issue enlisted belt. This belt fits all the one piece buckles and belt plates. Select Black or Russet leather. Now available in white.

    850

  •
    Send Inquiry For This Product

    Belt Enlisted M1855 & CS Oval Belt Plate

    M1855 US issue enlisted belt including cast brass (NOT lead filled) CS oval belt plate. This belt fits waist sizes up to 50 inches. The belt is available in black leather only.

    853

  •
    Send Inquiry For This Product

    Belt Enlisted M1855 & US Oval Belt Plate

    M1855 US issue enlisted belt including cast brass (NOT lead filled) US oval belt plate. This belt fits waist sizes up to 50 inches. The belt is available in black leather only.

    854

  •
    Send Inquiry For This Product

    Belt Enlisted M1855 Sealed Russet Leather

    M1855 Enlisted Belt. The russet leather has been sealed so it is slightly glossy and is difficult to dye.

    For waist sizes up to 48″. Fits all the one piece buckles and belt plates.

    852

  •
    Send Inquiry For This Product

    Belt Enlisted M1855 with Keeper

    M1855 US issue belt with Brass Keeper installed. The brass keepers were commonly utilized on mid to late war M1855 Enlisted waist belts for Federals. They began to appear by early 1863 to replace the leather loop keeper that had been the standard prior to the war. The keeper has prongs to fasten to the leather waist belt. This belt fits all the one piece buckles and belt plates. Select Black or Russet leather color.

    851

  •
    Send Inquiry For This Product

    Belt NCO & Officer

    This NCO Belt is made from high quality American leather. This belt is made to fit any 2-Piece Buckle or Spoon & Wreath Buckle and NO STITCHING is required to affix the Buckle. Brass hook makes this belt adjustable for many sizes. The NCO Belt is also appropriate for officers where a full sword belt is not applicable. The belt is available in Black or Russet leather.

    855

  •
    Send Inquiry For This Product

    Belt Roller Buckle Belt

    This Roller Buckle Belt is made of quality leather with a Japanned black roller buckle. The belt is 1 7/8 inches wide. Available in black leather only.

    859

  •
    Send Inquiry For This Product

    Belt Saber or Sword Belt

    This Saber or Sword Belt is made from high quality American leather and comes with the over the shoulder Sam Browne strap and all hangers. Snap swivels are NOT included and are available at an EXTRA CHARGE. 2 snap swivels are required.

    This belt is made to fit any 2-Piece Buckle or Spoon & Wreath Buckle and NO STITCHING is required to affix the Buckle. Brass hook makes this belt adjustable for many sizes. The belt is available in Black or Russet leather.

    856

  •
    Send Inquiry For This Product

    Belt Saber or Sword Belt Hanger

    This hanger is typically for NCO & Officer Belts, but can be used on enlisted and even modern day belts. This hanger is designed to slide over the existing belt. The hanger is available in black only.

    Snap Swivels are available at an extra charge. 2 snap swivels are needed.

    857

  •
    Send Inquiry For This Product

    Cap Box

    892

  •
    Send Inquiry For This Product

    Cartridge Box Strap

    891

  •
    Send Inquiry For This Product

    Cavalry 1874 Dyer Cartridge Pouch

    The M1874 Dyer cartridge pouch is used with the 45/70 rifle or carbine during the Indian Wars. It is made of high quality black leather with a US in oval embossed on the flap. The flap closure has a brass plate and finial. There are two belt loops on the back. It is lined with lambs wool. The pouch is available in black and Russet leather.

    876

  •
    Send Inquiry For This Product

    Cavalry 1876 McKeever Box

    The M1876 McKeever Box is used with the 45/70 rifle or carbine during the Indian Wars. It is made of high quality black leather with a US in oval embossed on the flap. The flap closure has a brass finial. There are two belt loops on the back. Inside are 2 rows of ten canvas loops for 20 cartridges. The box opens by folding down on a brass hinge. The box is available in Black or Russet leather.

    877

  •
    Send Inquiry For This Product

    Cavalry Carbine Cartridge Box

    An economical cavalry carbine cartridge box features an inner flap covering a tool pouch. Wooden blocks for cartridges are included. The tab on the front flap is both sewn and riveted. There are 2 belt loops on the back. The box is sewn in white thread and is made of black leather and now in Russet.

    Options: Black or Russet.

    873

  •
    Send Inquiry For This Product

    Cavalry Carbine Sling

    The carbine was carried by the trooper suspended from the Carbine Sling worn across his body attached to the carbine by the snap swivel. This carbine sling is authentically reproduced and is correct for both Civil War and later period cavalry. It features a regulation buckle and brass end piece.

    869

  •
    Send Inquiry For This Product

    Cavalry Carbine Sling

    Carbine Sling is authentically reproduced, carries an arsenal stamp, and is correct for both Civil War and later period cavalry. It features a regulation buckle and brass end piece. Available in Black Leather.

    870

  •
    Send Inquiry For This Product

    Cavalry Carbine Socket Tapered

    This Carbine Socket is made of high quality leather and is tapered per the originals. The Carbine Socket was designed to hold the barrel of a trooper’s carbine snugly while riding on his mount. This pattern of Carbine socket continued in service after the Civil War and into the Indian Wars through the early 1880’s until replaced by the Carbine Boots. Available in Black leather. Russet leather is available by special order.

    871

  •
    Send Inquiry For This Product

    Cavalry M1885 Carbine Boot

    The Carbine Boot was designed to hold the barrel of a trooper’s carbine snugly while riding on his mount.

    This first pattern M1885 carbine boot is made of High Quality leather. Available in Black leather only.

    872

  •
    Send Inquiry For This Product

    Cavalry Pommel Holster

    The Pommel Holster is made of high quality American Leather. It fits .36 or .44 Caliber Revolvers. Available in black leather. Russet leather is available as a special order.

    867

  •
    Send Inquiry For This Product

    Cavalry Saber Knot

    Black leather strap with a braided leather tassel. One end fastens to the grip of the saber and the tasseled end slips over the wrist to prevent dropping the saber during combat. It measures 22 inches including the tassel.

    864

  •
    Send Inquiry For This Product

    Cavalry Saddle Bags

    These Civil War Saddle Bags are made of high quality American leather. Great attention to detail has been made to ensure the most accurate authentic reproduction. The saddle bag measures approximately 9 inches wide x 10 inches high x 3 3/4 inches deep. The overall length from end to end is approximately 36 inches. These high quality saddle bags are available in Black or Russet leather.

    879

  •
    Send Inquiry For This Product

    Cavalry Spencer Quick Loader Box

    The Civil War Blakeslee Spencer Quick Loader Cartridge Box is designed for the Spencer Carbine. Because of the rapid speed that a Spencer carbine could be fired, a special box needed to be designed to hold cartridges for loading. 

    874